RTSP URLs for Hikvision, Reolink, Dahua and Tapo
The RTSP stream paths SecureEyes uses for Hikvision, Reolink, Dahua, Amcrest, Lorex, Tapo, Axis and Uniview cameras, with the ports we found on each.
The short answer
SecureEyes builds these addresses itself once it knows the brand, so you rarely type one. They are here for checking a camera, or for typing paths into Enter Manually.
A full address is the camera's IP address, the RTSP port (554 unless the camera uses another), then the path. For example: rtsp://192.168.1.64:554/Streaming/Channels/101
Stream paths by brand
| Brand | Main stream | Substream | ONVIF port on our test camera |
|---|---|---|---|
| Hikvision, HiWatch | /Streaming/Channels/101 | /Streaming/Channels/102 | 80 |
| Reolink | /Preview_01_main | /Preview_01_sub | 8000 and 80 |
| Reolink, older firmware | /h264Preview_01_main | /h264Preview_01_sub | As above |
| Dahua, Amcrest, Lorex | /cam/realmonitor?channel=1&subtype=0 | /cam/realmonitor?channel=1&subtype=1 | 80 |
| TP-Link Tapo, VIGI | /stream1 | /stream2 | 2020 |
| Axis | /axis-media/media.amp | Not in our table | Not tested |
| Uniview | /media/video1 | /media/video2 | Not tested |
| XiongMai-style boards | /11 | /12 | 8899 |
Second lenses
A Reolink TrackMix serves its second lens at /Preview_02_main and /Preview_02_sub. A dual-lens Dahua uses channel=2 in the same paths. SecureEyes asks for the second lens by itself.
Type paths yourself
Open the camera's settings, then Connection & Access > Stream profile > Enter Manually. See Choose a camera's stream, or set its stream paths.